Solar Panel Bracket

$165.00$799.00

The Solar Panel Bracket is sold as a pair, and allow you to securely mount solar panels to the roof of your tent.  Made from 2.5mm thick stainless steel with a black powder-coat finish with the laser cut mounting holes and supplied stainless steel bolts. The solar panel mounting brackets ensure that there is still airflow underneath the panel which helps to maintain the output efficiency of the panel.

If you do not already have your solar panels you can chose to purchase the panels with the brackets using the drop down list below. There are two sizes of panels available, 140W or 180W Monocrystalline PERC solar panels with a strong low profile 35mm anodised black frame with toughened glass, the full specifications of the panels are detailed below. Please note that wiring kit for connecting the panels is included, but there is no solar regulator included with the panels.

Solar Panel Options

There are two sizes of panels available to be purchased with the Solar Panel Bracket, 140W or a 180W panel, the full specifications of these panels are detailed below. Please note that there is no solar regulator or wiring kit included with the panels.

140W Monocrystalline PERC Solar Panel with Black Frame

These panels can be installed sideways across the roof of the tent, each panel will require a pair of the solar panel brackets, a maximum of three 140W panes can be fitted sideways on the roof of the tent.  If the 140W panels are fitted lengthways on the tent two panels can be fitted side by side, but they will overhang the side of the tent by approximately 30mm on either side and you will need to trim away some of the frame on the panel to clear the mounting bolts of the brackets.

This 140W solar panel has a strong 35mm anodised black frame with toughened glass, PERC A grade solar cells have been used to give a high-power output.  A red positive wire and a black negative wire with MC4 plugs attached.

Maximum power (Pmax) 140W
Maximum power voltage (Vmp) 17.5V
Maximum power current (Imp) 8.01A
Open circuit voltage (Voc) 22.3V
Short circuit voltage (Isc) 8.06A
Maximum system voltage 1000VDC
Dimensions 1105 x 666 x 35mm
Weight 7.8kg (per panel)

180W Monocrystalline PERC Solar Panel with Black Frame

The180W panels are fitted lengthways on the tent ,two panels can be fitted side by side, but they will overhang the side of the tent by approximately 30mm on either side and you will need to trim away some of the frame on the panel to clear the mounting bolts of the brackets.

The frame of the panel is a strong 35mm high black anodised aluminium. Toughened glass covers the solar cells which protects the panel from harsh conditions. The wiring on the back of the panel is a red positive and a black negative wire with MC4 connectors installed. This 180W solar panel will be suited for charging 12V battery banks when installed in parallel or larger voltage systems when installed in series.

Maximum power (Pmax) 180W
Maximum power voltage (Vmp) 19.5V
Maximum power current (Imp) 9.23A
Open circuit voltage (Voc) 23.0V
Short circuit voltage (Isc) 10.23A
Maximum system voltage 1000VDC
Dimensions 1455 x 666 x 35mm
Weight 12.5kg (per panel)

Wiring Kits

The following are included with the panels:

  • 2m long MC4 to Anderson Plug - comes with all purchases of solar panels
  • MC4 to MC4 bridge kit - comes with all purchases of more than one panel.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.